Commercial Bathroom Ada Grab Bar Requirements

An ada compliant grab bar handrail must be fully anchored and have a smooth surface that can be easily grabbed.

Commercial bathroom ada grab bar requirements. Two grab bars shall be installed on the back wall one located in accordance with 609 4 and the other located 8 inches 205 mm minimum and 10 inches 255 mm maximum above the rim of the bathtub. Grab bars in toilet stall requirements. The icc a117 1 standard for accessible and usable buildings and facilities which is referenced by the international building code requires an 18 min. Another grab bar 42 length is also used at 33 36 from the floor off.

Recessed dispensers are allowed within the 12 305 mm space above and 1 38 mm space below and at the end of a grab bar for ada the recessed dispenser must be flush. Grab bars should be at least 36 long on the rear wall or 42 on the side wall and be mounted 33 to 36 inches above the floor. Ansi allows recessed dispensers at the ends of the grab bar. Grab bars are not intended to be used as towel bars and vice versa.

Side wall the side wall grab bar shall be 42 inches 1065 mm long minimum located 12 inches 305 mm maximum from the rear wall and extending 54 inches 1370 mm minimum from the rear wall. Specific questions call the toll free ada information line at 800 514 0301 voice or 800 514 0383. Each grab bar shall be installed 15 inches 380 mm maximum from the head end wall and 12 inches 305 mm maximum from the control end wall. Ada grab bars in commercial toilet stalls side wall rear wall side wall the side wall grab bar shall be 42 inches 1065 mm long minimum located 12 inches 305 mm maximum from the rear wall and extending 54 inches 1370 mm minimum from the rear wall.

Grab bars must also have a gripping surface of at least 1 25 mounted at least 1 5 from the wall and be able to withstand a minimum of 250 pounds of pressure. For information about the ada including the revised 2010 ada regulations please visit the department s website www ada gov. For single handicapped restrooms there must be a 60 diameter for a wheel chair in the room. Ada standards for accessible design can be downloaded from www ada.

The grab bars are located off the back wall 33 36 from the floor and are 36 width. An overview of ada bathroom layout requirements. Grab bars must be installed between 34 and 38 inches above the floor and there must be a separation between the grab bar and the wall surface of at least 1 1 2 inches. The dispenser should be 13 inches and 48 inches above the floor and should not be located behind the side grab bar and should be appropriately positioned in an area that complies with the ada standard.

The bar must be 1 1 4 to 1 1 2 inches in diameter. The ada standards do not require this grab bar but allow a second grab bar to be within the 12 clearance above the horizontal grab bar 609 3 if there is a separation of 1 min.